Standards |
• |
If you don't find what you need here, please call or contact
us. |
|
| |
 A1008/A1008M-02e1 Standard Specification
for Steel, Sheet, Cold-Rolled, Carbon, Structural,
High-Strength Low-Alloy and High-Strength Low-Alloy
with Improved Formability, (Vol. 01.03)
- A109/A109M-00e1 Standard Specification
for Steel, Strip, Carbon (0.25 Maximum Percent), Cold-Rolled,
(Vol. 01.03)
- A1011/A1011M-02 Standard Specification
for Steel, Sheet and Strip, Hot-Rolled, Carbon, Structural,
High-Strength Low-Alloy and High-Strength Low-Alloy
with Improved Formability, (Vol. 01.03)
- A131/A131M-01 Standard Specification
for Structural Steel for Ships (Vol. 01.04)
- A183-98 Standard Specification
for Carbon Steel Track Bolts and Nuts (Vol. 01.04)
- A209/A209M-98 Standard Specification
for Seamless Carbon-Molybdenum Alloy-Steel Boiler
and Superheater Tubes, (Vol. 01.01)
- A214/A214M-96(2001) Standard Specification
for Electric-Resistance-Welded Carbon Steel Heat-Exchanger
and Condenser Tubes, (Vol. 01.01)
- A283/A283M-00 Standard Specification
for Low and Intermediate Tensile Strength Carbon Steel
Plates
- A308-02 Standard Specification
for Steel Sheet, Terne (Lead-Tin Alloy) Coated by
the Hot-Dip Process
- A309-01 Standard Test Method for
Weight and Composition of Coating on Terne Sheet by
the Triple-Spot Test
- A370-02e1 Standard Test Methods
and Definitions for Mechanical Testing of Steel Products,
(Vol. 01.01)
- A409/A409M-01 Standard Specification
for Welded Large Diameter Austenitic Steel Pipe for
Corrosive or High-Temperature Service
- A463/A463M-02a Standard Specification
for Steel Sheet, Aluminum-Coated, by the Hot-Dip Process
- A480/A480M-02 Standard Specification
for General Requirements for Flat-Rolled Stainless
and Heat-Resisting Steel Plate, Sheet, and Strip
- A500-01a Standard Specification
for Cold-Formed Welded and Seamless Carbon Steel Structural
Tubing in Rounds and Shapes
- A513-00 Standard Specification
for Electric-Resistance-Welded Carbon and Alloy Steel
Mechanical Tubing
- A53/A53M-01 Standard Specification
for Pipe, Steel, Black and Hot-Dipped, Zinc-Coated,
Welded and Seamless. (Vol. 01.01)
- A568/A568M-02 Standard Specification
for Steel, Sheet, Carbon, and High-Strength, Low-Alloy,
Hot-Rolled and Cold-Rolled, General Requirements
- A572/A572M-01 Standard Specification
for High-Strength Low-Alloy Columbium-Vanadium Structural
Steel
- A599/A599M-02 Standard Specification
for Tin Mill Products, Electrolytic Tin-Coated, Cold-Rolled
Sheet
- A603-98 Standard Specification
for Zinc-Coated Steel Structural Wire Rope
- A623-02 Standard Specification
for Tin Mill Products, General Requirements
- A624/A624M-98 Standard Specification
for Tin Mill Products, Electrolytic Tin Plate, Single
Reduced
- A630-98 Standard Test Methods
for Determination of Tin Coating Weights for Electrolytic
Tin Plate
- A632-02a Standard Specification
for Seamless and Welded Austenitic Stainless Steel
Tubing (Small-Diameter) for General Service
- A635/A635M-02 Standard Specification
for Steel, Sheet and Strip, Heavy-Thickness Coils,
Carbon, Commercial Steel, Drawing Steel, Structural,
High-Strength Low-Alloy, and High-Strength Low-Alloy
with Improved Formability, Hot-Rolled, General Requirements
- A653/A653M-02a Standard Specification
for Steel Sheet, Zinc-Coated (Galvanized) or Zinc-Iron
Alloy-Coated (Galvannealed) by the Hot-Dip Process
- A656/A656M-00a Standard Specification
for Hot-Rolled Structural Steel, High-Strength Low-Alloy
Plate with Improved Formability
- A659/A659M-97(2001) Standard Specification
for Commercial Steel (CS), Sheet and Strip, Carbon
(0.16 Maximum to 0.25 Maximum Percent), Hot-Rolled
- A682/A682M-02 Standard Specification
for Steel, Strip, High-Carbon, Cold-Rolled, General
Requirements
- A749/A749M-97 Standard Specification
for Steel, Strip, Carbon and High-Strength, Low-Alloy,
Hot-Rolled, General Requirements
- A754/A754M-96(2000) Standard Test
Method for Coating Weight (Mass) of Metallic Coatings
on Steel by X-Ray Fluorescence
- A767/A767M-00b Standard Specification
for Zinc-Coated (Galvanized) Steel Bars for Concrete
Reinforcement
- A792/A792M-02 Standard Specification
for Steel Sheet, 55 % Aluminum-Zinc Alloy-Coated by
the Hot-Dip Process
- A793-96(2001) Standard Specification
for Rolled Floor Plate, Stainless Steel
- A875/A875M-02a Standard Specification
for Steel Sheet, Zinc-5% Aluminum Alloy-Coated by
the Hot-Dip Process
- A879-00 Standard Specification
for Steel Sheet, Zinc Coated by the Electrolytic Process
for Applications Requiring Designation of the Coating
Mass on Each Surface
- A90/A90M-01 Standard Test Method
for Weight [Mass] of Coating on Iron and Steel Articles
with Zinc or Zinc-Alloy Coatings
- A924/A924M-99 Standard Specification
for General Requirements for Steel Sheet, Metallic-Coated
by the Hot-Dip Process
|
|
|
Discontinued Standards |
| |
| Volume 01.01, January
2003
A520 Standard Specification
for Supplementary Requirements for Seamless and Electric-Resistance-Welded
Carbon Steel Tubular Products for High-Temperature
Service Conforming to ISO Recommendations for Boiler
Construction (Discontinued 2000) No Replacement
A851 Standard Specification
for High-Frequency Induction Welded, Unannealed, Austenitic
Steel Condenser Tubes (Discontinued 2002) No Replacement
Volume 01.03, February 2003
A366/A366M Standard Specification
for Commercial Steel (CS) Sheet, Carbon (0.15 Maximum
Percent) Cold-Rolled (Withdrawn 2000) Replaced by
A1008/A1008M
A569/A569M Standard Specification
for Steel, Carbon (0.15 Maximum, Percent), Hot-Rolled
Sheet and Strip Commercial (Withdrawn 2000) Replaced
by A1011/A1011M
A570/A570M Standard Specification
for Steel, Sheet and Strip, Carbon, Hot-Rolled (Withdrawn
2000) Replaced by A1011/A1011M
A607 Standard Specification
for Steel, Sheet and Strip, High-Strength, Low-Alloy,
Columbium or Vanadium, or Both, Hot-Rolled and Cold-Rolled
(Withdrawn 2000) Replaced by A1008 and A1011/A1011M
A611 Standard Specification
for Structural Steel (SS), Sheet, Carbon, Cold-Rolled
(Withdrawn 2000) Replaced by A1008/A1008M
A620/A620M Standard Specification
for Drawing Steel (DS), Sheet, Carbon, Cold-Rolled
(Withdrawn 2000) Replaced by A1008/A1008M
A622/A622M Standard Specification
for Drawing Steel (DS), Sheet and Strip, Carbon, Hot-Rolled
(Withdrawn 2000) Replaced by A1011/A1011M
A715 Standard Specification
for Steel Sheet and Strip, High-Strength, Low-Alloy,
Hot-Rolled, and Steel Sheet, Cold-Rolled, High-Strength,
Low-Alloy, with Improved Formability (Withdrawn 2000)
Replaced by A1008/A1008M
A715 Standard Specification
for Steel Sheet and Strip, High-Strength, Low-Alloy,
Hot-Rolled, and Steel Sheet, Cold-Rolled, High-Strength,
Low-Alloy, with Improved Formability (Withdrawn 2000)
Replaced by A1011/A1011M
A907/A907M Standard Specification
for Steel, Sheet and Strip, Heavy Thickness Coils,
Carbon, Hot-Rolled, Structural Quality (Withdrawn
2001) Replaced by A1018/A1018M
A935/A935M Standard Specification
for Steel, Sheet and Strip, Heavy Thickness Coils,
High Strength, Low-Alloy, Columbium or Vanadium, or
Both, Hot-Rolled (Withdrawn 2001) Replaced by A1018/A1018M
A936/A936M Standard Specification
for Steel, Sheet and Strip, Heavy Thickness Coils,
High Strength, Low-Alloy, Hot-Rolled, with Improved
Formability (Withdrawn 2001) Replaced by A1018/A1018M
A963/A963M Standard Specification
for Deep Drawing Steel (DDS), Sheet, Carbon, Cold-Rolled
(Withdrawn 2000) Replaced by A1008/A1008M
A969/A969M Standard Specification
for Extra Deep Drawing Steel (EDDS), Sheet, Carbon,
Cold-Rolled (Withdrawn 2000) Replaced by A1008/A1008M
Volume 01.04, January 2003
A616/A616M Standard Specification
for Rail-Steel Deformed and Plain Bars for Concrete
Reinforcement (Withdrawn 1999) Replaced by A996/A996M
A617/A617M Standard Specification
for Axle-Steel Deformed and Plain Bars for Concrete
Reinforcement (Withdrawn 1999) Replaced by A996/A996M
A864/A864M Specification
for Steel Wire, Deformed, for Prestressed Concrete
Railroad Ties (Withdrawn 1997) No Replacement
Volume 01.06, February 2003
A584 Standard Specification
for Aluminum-Coated Steel Woven Wire Fence Fabric
(Discontinued 2002) No replacement
A585 Standard Specification
for Aluminum-Coated Steel Barbed Wire (Discontinued
2002) Replaced by A121
F1222 Classification for
Hardware for Wood Fencing (Discontinued 2000) No Replacement
|
|
CONTINENTAL
STEEL & TUBE COMPANY
